BS EN 845-3-2003
|
ID： |
84C9846D3C784BACBF9DD5B353602F98 |
|
文件大小(MB)： |
0.48 |
|
页数： |
36 |
|
文件格式： |
|
|
日期： |
2013-6-23 |
|
购买： |
文本摘录（文本识别可能有误，但文件阅览显示及打印正常，pdf文件可进行文字搜索定位）：
BRITISH STANDARD BS EN,845-3:2003,Specification for,ancillary components,for masonry —,Part 3: Bed joint reinforcement of steel,meshwork,The European Standard EN 845-3:2003 has the status of a,British Standard,ICS 91.060.10; 91.080.30, , ,,,,, , ,Copyright British Standards Institution,Provided by IHS under license with BSI - Uncontrolled Copy Licensee=Naval Aviation Depot/5918326100,No reproduction or networking permitted without license from IHS Not for Resale, 01/15/2008 22:05:46 MST,--``,``,``,,``````,,```````,`,`-`-`,,`,,`,`,,`---,BS EN 845-3:2003,This British Standard was,published under the authority,of the Standards Policy and,Strategy Committee,on 16 September 2003,. BSI 16 September 2003,ISBN 0 580 42608 4,National foreword,This British Standard is the official English language version of,BS EN 845-3:2003.,EN 845-3 is a candidate “harmonized” European Standard and fully takes into,account the requirements of the European Commission mandate M116,Masonry and related products, given under the EU Construction Products,Directive (89/106/EEC), and is intended to lead to CE marking. The date of,applicability of EN 845-3 as a “harmonized” European Standard, i.e. the date,after which this standard may be used for CE marking purposes, is subject to,an announcement in the Official Journal of the European Communities.,The Commission in consultation with Member States has agreed a transition,period for the co-existence of “harmonized” European Standards and their,corresponding national standard(s). It is intended that this period will,comprise a period, usually nine months, after the date of availability of the,European Standard, during which any required changes to national,regulations are to be made, followed by a further period, usually of 12 months,for the implementation of CE marking. At the end of this co-existence period,the national standard(s) will be withdrawn.,EN 845-3 is the subject of transitional arrangements agreed under the,Commission mandate. In the UK, there are no corresponding national,standards of national origin.,The UK participation in its preparation was entrusted by Technical Committee,B/519, Masonry and associated testing, to Subcommittee B/519/3, Ancillary,components, which has the responsibility to:,— aid enquirers to understand the text;,— present to the responsible international/European committee any,enquiries on the interpretation, or proposals for change, and keep UK,interests informed;,— monitor related international and European developments and,promulgate them in the UK.,A list of organizations represented on this subcommittee can be obtained on,request to its secretary.,Amendments issued since publication,Amd. No. Date Comments,Copyright British Standards Institution,Provided by IHS under license with BSI - Uncontrolled Copy Licensee=Naval Aviation Depot/5918326100,No reproduction or networking permitted without license from IHS Not for Resale, 01/15/2008 22:05:46 MST,--``,``,``,,``````,,```````,`,`-`-`,,`,,`,`,,`---,BS EN 845-3:2003,. BSI 16 September 2003 i,EN 845-3:2003 has been prepared by CEN/TC 125, Masonry, and immediately,supersedes EN 845-3:2001 which is withdrawn.,EN 845-3 specifies the characteristics and performance requirements for bed,joint reinforcement available throughout the CEN member countries. It aims to,do so in product performance terms, avoiding as far as possible prescriptive,requirements and all the traditional designations of these products available,throughout Europe. Current products, however, will continue to be,manufactured, traded and used, even though they are not referred to by name in,this European Standard.,EN 845-3 includes clauses covering initial type tests, factory production control,sampling for initial type testing and independent testing of consignments. These,are similar in all masonry product specifications.,The UK National Annex NA attached to this standard provides an informative,commentary on EN 845-3. Nothing in this annex should be construed as,specifying requirements other than those contained in the normative parts of,this European Standard.,If CE marking is performed, the procedures in Annex ZA will apply. The,significance of the CE marking is that the product manufacturer claims,compliance with the “harmonized” requirements given in the normative text of,the product standard. These relate to the essential requirements of the EU,Construction Products Directive. Not all product characteristics need necessarily,be given on the CE marking, but those product characteristics covered by,regulations in force in each EU Member State, where……
……